Taro Products

 

SINGLE PHASE CENTRIFUGAL MONOBLOCS
Motor rating : 0.5 - 1.0 hp
Head range : 6 - 32 m
Discharge : 1.3 - 25.8 m3 / hr

SINGLE PHASE CENTRIFUGAL MONOBLOCS
Taro single phase Monoblocs are compact pumping systems with all the advantages of mounting the prime-mover and pump integrally on the same shaft. Available in both high and slow speed models. The motor is of TEFC squirrel cage type designed to operate in a wide voltage range.

SINGLE PHASE JET MONOBLOCS
Motor rating : 0.5 - 1.5 hp
DLWL range : 9 - 70 m
Discharge : 0.26 - 3.7 m3 / hr

SINGLE PHASE JET MONOBLOCS
Taro Jet monoblocs are designed to pump water from deep bore wells. They are capacitor start, TEFC enclosure with rugged cast iron construction enabling operations under extreme operating conditions. These sets are available in both vertical and horizontal mounting types.

SINGLE PHASE SHALLOW WELL JET MONOBLOCS
Motor rating : 0.5 hp
DLWL range : 6 - 32 m
Discharge : 0.6 - 2.6 m3 / hr

SINGLE PHASE SHALLOW WELL JET MONOBLOCS
Taro Shallow well Jet pumps are designed to pump water from shallow wells with increased suction through inbuilt jet unit assembly. They are capacitor start, TEFC enclosure with rugged cast iron construction enabling operations under extreme operating conditions.

DOMESTIC & MINI MONOBLOCS
Motor rating : 0.25 - 1.0 hp
Head range : 6 - 45 m
Discharge : 0.43 - 3.5 m3 / hr

DOMESTIC & MINI MONOBLOCS
Taro single phase Domestic and Mini-monoblocs are Regenerative self priming type pumps with the advantage of self priming effect. They come in both aluminium and cast iron motor bodies both of which are available in high and slow speed models for a varied head and discharge conditions.

NON-CLOG SELF PRIIMNG MONOBLOCS
Motor rating : 1.0 hp
Head range : 6 - 14 m
Discharge : 2.3 - 15.7 m3 / hr

NON-CLOG SELF PRIIMNG MONOBLOCS
Taro single phase Non-clog self priming monoblocs are compact pumping systems, with all the advantages of mounting the prime movers and the pump integrally on the same shaft. East installation and low operating cost with improved efficiency and minimal maintenance by having the set operated on a common shaft. Efficient self priming action without foot valve designed for quick air release.

SINGLE PHASE INDUCTION MOTORS
Motor rating : 0.5 hp

SINGLE PHASE INDUCTION MOTORS
Taro single phase Induction motors are of TEFC squirrel cage type designed to operate in a wide voltage range. These motors are available in international standard frame sizes. They are built in robust, grey cast iron housing and incorporate dynamically balanced rotors. Accurate control on uniformity of the air gap minimizes vibration and ensures smooth and silent running. Available in foot mounting types

BORE WELL SUBMERSIBLE PUMPS
Motor rating : 0.5 - 50 hp
Head range : 10.2 - 405 m
Discharge : 0.4 - 133.2 m3 / hr

BORE WELL SUBMERSIBLE PUMPS
Taro Bore well submersibles are manufactured both in radial and mixed flow designs. The motor portion is a squirrel cage wet type water cooled induction motor with stainless steel stator shell to prevent rust formation. Specially designed thrust bearing is provided for long life. Available in 3, 4, 5, 6 and 8 inch sizes.

SINGLE PHASE OPEN WELL SUBMERSIBLE MONOBLOCS
Motor rating : 1 – 2 hp
Head range : 6 – 36 m
Discharge : 1.8 – 59.0 m3 / hr

SINGLE PHASE OPEN WELL SUBMERSIBLE MONOBLOCS
Texmo single phase Open well submersible monoblocs are ideal for locations where the height of the water table fluctuates frequently. These sets need no adjustments in position as they rest at the bottom of the well. Bearings are water lubricated and the motor is designated to withstand a wide range of voltage fluctuations.

STAINLESS STEEL BORE WELL SUBMERSIBLE PUMPS
Motor rating : 3 - 20 hp
Head range : 10.3 - 242 m
Discharge : 10.8 - 27.0 m3 / hr

STAINLESS STEEL BORE WELL SUBMERSIBLE PUMPS
Taro Stainless steel Bore well submersible pumps are suitable for corrosive environments. The weight to power ratio of these pumps is very low compared to conventional cast iron pumps. This facilitates easy handling and low installation cost. The submersible pump unit consists of a centrifugal wet end with one or more impellers with a strainer protected inlet bracket.